Virtex 7 as bitcoin miner, how many gigahashes - Xilinx

Best $100-$300 FPGA development board in 2018?

Hello, I’ve been trying to decide on a FPGA development board, and have only been able to find posts and Reddit threads from 4-5 years ago. So I wanted to start a new thread and ask about the best “mid-range” FGPA development board in 2018. (Price range $100-$300.)
I started with this Quora answer about FPGA boards, from 2013. The Altera DE1 sounded good. Then I looked through the Terasic DE boards.
Then I found this Reddit thread from 2014, asking about the DE1-SoC vs the Cyclone V GX Starter Kit: https://www.reddit.com/FPGA/comments/1xsk6w/cyclone_v_gx_starter_kit_vs_de1soc_board/‬ (I was also leaning towards the DE1-SoC.)
Anyway, I thought I better ask here, because there are probably some new things to be aware of in 2018.
I’m completely new to FPGAs and VHDL, but I have experience with electronics/microcontrollers/programming. My goal is to start with some basic soft-core processors. I want to get some C / Rust programs compiling and running on my own CPU designs. I also want to play around with different instruction sets, and maybe start experimenting with asynchronous circuits (e.g. clock-less CPUs)
Also I don’t know if this is possible, but I’d like to experiment with ternary computing, or work with analog signals instead of purely digital logic. EDIT: I just realized that you would call those FPAAs, i.e. “analog” instead of “gate”. Would be cool if there was a dev board that also had an FPAA, but no problem if not.
EDIT 2: I also realized why "analog signals on an FPGA" doesn't make any sense, because of how LUTs work. They emulate boolean logic with a lookup table, and the table can only store 0s and 1s. So there's no way to emulate a transistor in an intermediate state. I'll just have play around with some transistors on a breadboard.
UPDATE: I've put together a table with some of the best options:
Board Maker Chip LUTs Price SoC? Features
icoBoard Lattice iCE40-HX8K 7,680 $100 Sort of A very simple FPGA development board that plugs into a Raspberry Pi, so you have a "backup" hard-core CPU that can control networking, etc. Supports a huge range of pmod accessories. You can write a program/circuit so that the Raspberry Pi CPU and the FPGA work together, similar to a SoC. Proprietary bitstream is fully reverse engineered and supported by Project IceStorm, and there is an open-source toolchain that can compile your hardware design to bitstream. Has everything you need to start experimenting with FPGAs.
iCE40-HX8K Breakout Board Lattice iCE40-HX8K-CT256 7,680 $49 No 8 LEDs, 8 switches. Very similar to icoBoard, but no Raspberry Pi or pmod accessories.
iCE40 UltraPlus Lattice iCE40 UltraPlus FPGA 5280 $99 No Chip specs. 4 switchable FPGAs, and a rechargeable battery. Bluetooth module, LCD Display (240 x 240 RGB), RGB LED, microphones, audio output, compass, pressure, gyro, accelerometer.
Go Board Lattice ICE40 HX1K FPGA 1280 $65 No 4 LEDs, 4 buttons, Dual 7-Segment LED Display, VGA, 25 MHz on-board clock, 1 Mb Flash.
snickerdoodle Xilinx Zynq 7010 28K $95 Yes Xilinx Zynq 7-Series SoC - ARM Cortex-A9 processor, and Artix-7 FPGA. 125 IO pins. 1GB DDR2 RAM. Texas Instruments WiLink 8 wireless module for 802.11n Wi-Fi and Bluetooth 4.1. No LEDs or buttons, but easy to wire up your own on a breadboard. If you want to use a baseboard, you'll need a snickerdoodle black ($195) with the pins in the "down" orientation. (E.g. The "breakyBreaky breakout board" ($49) or piSmasher SBC ($195)). The snickerdoodle one only comes with pins in the "up" orientation and doesn't support any baseboards. But you can still plug the jumpers into the pins and wire up things on a breadboard.
numato Mimas A7 Xilinx Artix 7 52K $149 No 2Gb DDR3 RAM. Gigabit Ethernet. HDMI IN/OUT. 100MHz LVDS oscillator. 80 IOs. 7-segment display, LEDs, buttons. (Found in this Reddit thread.)
Ultra96 Xilinx Zynq UltraScale+ ZU3EG 154K $249 Yes Has one of the latest Xilinx SoCs. 2 GB (512M x32) LPDDR4 Memory. Wi-Fi / Bluetooth. Mini DisplayPort. 1x USB 3.0 type Micro-B, 2x USB 3.0 Type A. Audio I/O. Four user-controllable LEDs. No buttons and limited LEDs, but easy to wire up your own on a breadboard
Nexys A7-100T Xilinx Artix 7 15,850 $265 No . 128MiB DDR2 RAM. Ethernet port, PWM audio output, accelerometer, PDM microphone, microphone, etc. 16 switches, 16 LEDs. 7 segment displays. USB HID Host for mice, keyboards and memory sticks.
Zybo Z7-10 Xilinx Zynq 7010 17,600 $199 Yes Xilinx Zynq 7000 SoC (ARM Cortex-A9, 7-series FPGA.) 1 GB DDR3 RAM. A few switches, push buttons, and LEDs. USB and Ethernet. Audio in/out ports. HDMI source + sink with CEC. 8 Total Processor I/O, 40 Total FPGA I/O. Also a faster version for $299 (Zybo Z7-20).
Arty A7 Xilinx Artix 7 15K $119 No 256MB DDR3L. 10/100 Mbps Ethernet. A few switches, buttons, LEDs.
DE10-Standard (specs) Altera Cyclone V 110K $350 Yes Dual-core Cortex-A9 processor. Lots of buttons, LEDs, and other peripherals.
DE10-Nano Altera Cyclone V 110K $130 Yes Same as DE10-Standard, but not as many peripherals, buttons, LEDs, etc.

Winner:

icoBoard ($100). (Buy it here.)
The icoBoard plugs into a Raspberry Pi, so it's similar to having a SoC. The iCE40-HX8K chip comes with 7,680 LUTs (logic elements.) This means that after you learn the basics and create some simple circuits, you'll also have enough logic elements to run the VexRiscv soft-core CPU (the lightweight Murax SoC.)
The icoBoard also supports a huge range of pluggable pmod accessories:
You can pick whatever peripherals you're interested in, and buy some more in the future.
Every FPGA vendor keeps their bitstream format secret. (Here's a Hacker News discussion about it.) The iCE40-HX8K bitstream has been fully reverse engineered by Project IceStorm, and there is an open-source set of tools that can compile Verilog to iCE40 bitstream.
This means that you have the freedom to do some crazy experiments, like:
You don't really have the same freedom to explore these things with Xilinx or Altera FPGAs. (Especially asynchronous circuits.)

Links:

Second Place:

iCE40-HX8K Breakout Board ($49)

Third Place:

numato Mimas A7 ($149).
An excellent development board with a Xilinx Artix 7 FPGA, so you can play with a bigger / faster FPGA and run a full RISC-V soft-core with all the options enabled, and a much higher clock speed. (The iCE40 FPGAs are a bit slow and small.)
Note: I've changed my mind several times as I learned new things. Here's some of my previous thoughts.

What did I buy?

I ordered a iCE40-HX8K Breakout Board to try out the IceStorm open source tooling. (I would have ordered an icoBoard if I had found it earlier.) I also bought a numato Mimas A7 so that I could experiment with the Artix 7 FPGA and Xilinx software (Vivado Design Suite.)

Questions

What can I do with an FPGA? / How many LUTs do I need?

submitted by ndbroadbent to FPGA [link] [comments]

Why I see Virtcoin as a $200 coin when really considering ASIC resistance

First of all, Vertcoin does indeed have a tremendous community, and this is not to be understated. However, this is only a fraction of the value position of this coin. I just want to expand on the ASIC resistance thing a bit. As an electrical engineer who has actually designed ASIC's, I do have some background on this. What I can tell you is that this term "ASIC Resistant" is that it is a little bit misleading. In theory, any algorithm can be turned into an ASIC. An ASIC or Application Specific Integrated Circuit is a digital or analog or mixed analog digital circuit that has been cast into Sea of Gates, Semi-Custom, or Full Custom ASIC technology. The cheapest route is Sea of Gates. If one didn't want to do a Sea of Gates ASIC, they could implement an algorithm in a FPGA, or Field Programmable Gate Array. Altera and Xilinx are the dominant players here. In the early days of Bitcoin, there were many FPGA miners, this was a very common way to mine Bitcoin.
Overall, It takes somewhere between USD $50,000 to $1,000,000 to make an ASIC. It's an expensive process. There is a tremendous amount of engineering, where the circuit is designed in System Verilog, Verilog or VHDL, and very extensive testbenches to make sure that the when the chip is made it works the first time. Engineers prototype ASICs in FPGA's, and the development boards for ASIC emulation can cost $20k or more just in themselves. Then the design goes to a foundry where the chip is made, and that will be expensive, $50k to $500k. So there has to be motivation to make an ASIC, such as high volume chip sales. For Sea of Gates technology, a rule of thumb is that there is typically a break even point when a company sells 1,000 to 2,000 chips a year that has been made into an ASIC. That is because Sea of Gates is about a $100k process.
The ASIC Resistance of Vertcoin is not technology related, i.e. the algorithm that is currently being used could be made into an ASIC. What makes Vertcoin ASIC resistance is the commitment of the team to change the algorithm if someone does make an ASIC to mine Vertcoin. This is what gives Vertcoin it's value position. I really appreciate that! This is a de-facto way to limit the power of miners, in one simple swipe.
How wants to deal with this Bitcoin forking situation anymore? At this point, with the upcoming fork, it seems more and more unnecessary. I see Bitcoin as a storage of value layer, and other coins such as VTC and LTC as transaction layer coins.
To me what gives VTC value is the intention of the community AND the consequent action of it.
submitted by TeslaCrytpo to vertcoin [link] [comments]

Anyone bullish on XLNX?

There's a pretty interesting debate in the AI space right now on whether FPGAs or ASICs are the way to go for hardware-accelerated AI in production. To summarize, it's more about how to operationalize AI - how to use already trained models with millions of parameters to get real-time predictions, like in video analysis or complex time series models based on deep neural networks. Training those AI models still seems to favor GPUs for now.
Google seem to be betting big on ASICs with their TPU. On the other hand, Microsoft and Amazon seem to favor FPGAs. In fact Microsoft have recently partnered with Xilinx to add FPGA co-processors on half of their servers (they were previously only using Intel's Altera).
The FPGA is the more flexible piece of hardware but it is less efficient than an ASIC, and have been notoriously hard to program against (though things are improving). There's also a nice article out there summarizing the classical FPGA conundrum: they're great for designing and prototyping but as soon as your architecture stabilizes and you're looking to ramp up production, taking the time to do an ASIC will more often be the better investment.
So the question (for me) is where AI inference will be in that regard. I'm sure Google's projects are large scale enough that an ASIC makes sense, but not everyone is Google. And there is so much research being done in the AI space right now and everyone's putting out so many promising new ideas that being more flexible might carry an advantage. Google have already put out three versions of their TPUs in the space of two years
Which brings me back to Xilinx. They have a promising platform for AI acceleration both in the datacenter and embedded devices which was launched two months ago. If it catches on it's gonna give them a nice boost for the next couple of years. If it doesn't, they still have traditional Industrial, Aerospace & Defense workloads to fall back on...
Another wrinkle is their SoCs are being used in crypto mining ASICs like Antminer, so you never know how that demand is gonna go. As the value of BTC continues to sink there is constant demand for more efficient mining hardware, and I do think cryptocurrencies are here to stay. While NVDA has fallen off a cliff recently due to excess GPU inventory, XLNX has kept steady.

XLNX TTM P/E is 28.98
Semiconductors - Programmable Logic industry's TTM P/E is 26.48

Thoughts?
submitted by neaorin to StockMarket [link] [comments]

Antminer S9 no longer hashing?

Good morning folks,
I have an Antminer S9 that has performed flawlessly. After I moved it to a better location, I noticed that it no longer seems to be working. The green light is flashing, but it doesn't seem to be hashing to my pool (Nicehash).
I'm fairly new to Bitcoining mining and can't make sense of some of the information on my status screen. Before I jump into Bitmain support, I was wondering if anyone could clue me in as to what the problem might be.
https://s15.postimg.cc/i0n5qsyoInked_Capture_LI.jpg
I'll post my Kernal Log here.
Thank you in advance!!!
KERNAL LOG: [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000308] ps7-ttc #0 at f0006000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000658] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040436] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042612] CPU: Testing write buffer coherency: ok
[ 0.042974] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043036] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043263] L310 cache controller enabled
[ 0.043282] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121037] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210357] Brought up 2 CPUs
[ 0.210376] SMP: Total of 2 processors activated.
[ 0.210385] CPU: All CPU(s) started in SVC mode.
[ 0.211051] devtmpfs: initialized
[ 0.213481] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214724] regulator-dummy: no parameters
[ 0.223736] NET: Registered protocol family 16
[ 0.226067] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228361] cpuidle: using governor ladder
[ 0.228374] cpuidle: using governor menu
[ 0.235908] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237453] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237572] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.259435] bio: create slab at 0
[ 0.261172] vgaarb: loaded
[ 0.261915] SCSI subsystem initialized
[ 0.262814] usbcore: registered new interface driver usbfs
[ 0.262985] usbcore: registered new interface driver hub
[ 0.263217] usbcore: registered new device driver usb
[ 0.263743] media: Linux media interface: v0.10
[ 0.263902] Linux video capture interface: v2.00
[ 0.264150] pps_core: LinuxPPS API ver. 1 registered
[ 0.264162] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[[email protected]](mailto:[email protected])>
[ 0.264286] PTP clock support registered
[ 0.264656] EDAC MC: Ver: 3.0.0
[ 0.265719] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268708] DMA-API: preallocated 4096 debug entries
[ 0.268724] DMA-API: debugging enabled by kernel config
[ 0.268820] Switched to clocksource arm_global_timer
[ 0.289596] NET: Registered protocol family 2
[ 0.290280] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.290375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.290535] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.290612] TCP: reno registered
[ 0.290633] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290689] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290971] NET: Registered protocol family 1
[ 0.291346] RPC: Registered named UNIX socket transport module.
[ 0.291359] RPC: Registered udp transport module.
[ 0.291368] RPC: Registered tcp transport module.
[ 0.291376] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291391] PCI: CLS 0 bytes, default 64
[ 0.291857] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293945] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.295408] bounce pool size: 64 pages
[ 0.296323] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296525] msgmni has been set to 1486
[ 0.297330] io scheduler noop registered
[ 0.297343] io scheduler deadline registered
[ 0.297385] io scheduler cfq registered (default)
[ 0.308358] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308380] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.434378] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.006815] console [ttyPS0] enabled
[ 1.011106] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.018731] [drm] Initialized drm 1.1.0 20060810
[ 1.036029] brd: module loaded
[ 1.045494] loop: module loaded
[ 1.055163] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060985] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.068779] libphy: XEMACPS mii bus: probed
[ 1.073341] ------------- phy_id = 0x3625e62
[ 1.078112] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.087072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.093912] ehci-pci: EHCI PCI platform driver
[ 1.101155] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.107952] usbcore: registered new interface driver usb-storage
[ 1.114850] mousedev: PS/2 mouse device common for all mice
[ 1.120975] i2c /dev entries driver
[ 1.127946] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.133474] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.139426] Xilinx Zynq CpuIdle Driver started
[ 1.144261] sdhci: Secure Digital Host Controller Interface driver
[ 1.150384] sdhci: Copyright(c) Pierre Ossman
[ 1.154700] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.161601] mmc0: no vqmmc regulator found
[ 1.165614] mmc0: no vmmc regulator found
[ 1.208845] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.217539] usbcore: registered new interface driver usbhid
[ 1.223054] usbhid: USB HID core driver
[ 1.227806] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.234107] nand: Micron MT29F2G08ABAEAWP
[ 1.238074] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.244027] Bad block table found at page 131008, version 0x01
[ 1.250251] Bad block table found at page 130944, version 0x01
[ 1.256303] 3 ofpart partitions found on MTD device pl353-nand
[ 1.262080] Creating 3 MTD partitions on "pl353-nand":
[ 1.267174] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.275230] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.282582] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.291630] TCP: cubic registered
[ 1.294869] NET: Registered protocol family 17
[ 1.299597] Registering SWP/SWPB emulation handler
[ 1.305497] regulator-dummy: disabling
[ 1.309875] UBI: attaching mtd1 to ubi0
[ 1.836565] UBI: scanning is finished
[ 1.848221] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.855302] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.862063] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.868728] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875605] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881586] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.888693] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1134783803
[ 1.897736] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.906953] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.906959] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.911038] ALSA device list:
[ 1.911042] No soundcards found.
[ 1.927420] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.956473] UBIFS: recovery needed
[ 2.016970] UBIFS: recovery completed
[ 2.020709] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.026635] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.035771] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.045653] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.050693] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.061987] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.069184] devtmpfs: mounted
[ 2.072297] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.920928] random: dd urandom read with 0 bits of entropy available
[ 3.318860]
[ 3.318860] bcm54xx_config_init
[ 3.928853]
[ 3.928853] bcm54xx_config_init
[ 7.929682] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.935787] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.563181] In axi fpga driver!
[ 22.566260] request_mem_region OK!
[ 22.569676] AXI fpga dev virtual address is 0xf01fe000
[ 22.574751] *base_vir_addr = 0x8c510
[ 22.590723] In fpga mem driver!
[ 22.593791] request_mem_region OK!
[ 22.597361] fpga mem virtual address is 0xf3000000
[ 23.408156]
[ 23.408156] bcm54xx_config_init
[ 24.038071]
[ 24.038071] bcm54xx_config_init
[ 28.038487] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.044593] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8118b4c610358854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[15] has core num=5
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[17] has core num=8
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[8] has core num=13
Chain[7] ASIC[9] has core num=11
Chain[7] ASIC[13] has core num=11
Chain[7] ASIC[19] has core num=14
Chain[7] ASIC[30] has core num=6
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[42] has core num=2
Chain[7] ASIC[55] has core num=1
Chain[7] ASIC[57] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=108 on chain[5], value=880
get PIC voltage=74 on chain[6], value=900
get PIC voltage=108 on chain[7], value=880
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1643 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8118b4c610358854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J6] has backup chain_voltage=880
Chain[J6] test patten OK temp=-126
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-120
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J8] has backup chain_voltage=880
Chain[J8] test patten OK temp=-125
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=108 value=880
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J8] orignal chain_voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[15] has core num=5
Chain[J7] has core num in PIC
Chain[J7] ASIC[17] has core num=8
Chain[J8] has core num in PIC
Chain[J8] ASIC[8] has core num=13
Chain[J8] ASIC[9] has core num=11
Chain[J8] ASIC[13] has core num=11
Chain[J8] ASIC[19] has core num=14
Chain[J8] ASIC[30] has core num=6
Chain[J8] ASIC[32] has core num=1
Chain[J8] ASIC[42] has core num=2
Chain[J8] ASIC[55] has core num=1
Chain[J8] ASIC[57] has core num=2
miner total rate=13999GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:681 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:681 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:675
Asic[ 9]:618 Asic[10]:631 Asic[11]:681 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:675 Asic[18]:618 Asic[19]:637 Asic[20]:675 Asic[21]:631 Asic[22]:650 Asic[23]:687 Asic[24]:631
Asic[25]:537 Asic[26]:687 Asic[27]:631 Asic[28]:587 Asic[29]:687 Asic[30]:612 Asic[31]:650 Asic[32]:687
Asic[33]:631 Asic[34]:650 Asic[35]:687 Asic[36]:631 Asic[37]:662 Asic[38]:693 Asic[39]:631 Asic[40]:662
Asic[41]:662 Asic[42]:543 Asic[43]:668 Asic[44]:693 Asic[45]:568 Asic[46]:675 Asic[47]:700 Asic[48]:631
Asic[49]:568 Asic[50]:700 Asic[51]:631 Asic[52]:625 Asic[53]:700 Asic[54]:631 Asic[55]:675 Asic[56]:662
Asic[57]:631 Asic[58]:662 Asic[59]:687 Asic[60]:631 Asic[61]:681 Asic[62]:700
Chain:5 max freq=700
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:637 Asic[14]:656 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:637 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:637 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:650 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:650 Asic[56]:662
Asic[57]:650 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:650 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:656 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:656
Asic[ 9]:618 Asic[10]:631 Asic[11]:656 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:656 Asic[18]:618 Asic[19]:637 Asic[20]:656 Asic[21]:631 Asic[22]:650 Asic[23]:656 Asic[24]:631
Asic[25]:537 Asic[26]:656 Asic[27]:631 Asic[28]:587 Asic[29]:656 Asic[30]:612 Asic[31]:650 Asic[32]:656
Asic[33]:631 Asic[34]:650 Asic[35]:656 Asic[36]:631 Asic[37]:656 Asic[38]:656 Asic[39]:631 Asic[40]:656
Asic[41]:656 Asic[42]:543 Asic[43]:656 Asic[44]:656 Asic[45]:568 Asic[46]:656 Asic[47]:656 Asic[48]:631
Asic[49]:568 Asic[50]:656 Asic[51]:631 Asic[52]:625 Asic[53]:656 Asic[54]:631 Asic[55]:656 Asic[56]:656
Asic[57]:631 Asic[58]:656 Asic[59]:656 Asic[60]:631 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:6 max freq=637
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:7 max freq=643
Chain:7 min freq=637
max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:26 remote:27 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:26 remote:27 offset:29
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:26 remote:28 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
miner rate=13501 voltage limit=900 on chain[5]
get PIC voltage=880 on chain[5], check: must be < 900
miner rate=13501 voltage limit=900 on chain[6]
get PIC voltage=900 on chain[6], check: must be < 900
miner rate=13501 voltage limit=900 on chain[7]
get PIC voltage=880 on chain[7], check: must be < 900
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=880 [108]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=618 freq[01]=631 freq[02]=650 freq[03]=618 freq[04]=631 freq[05]=656 freq[06]=618 freq[07]=631
freq[08]=656 freq[09]=618 freq[10]=631 freq[11]=656 freq[12]=631 freq[13]=637 freq[14]=606 freq[15]=487
freq[16]=637 freq[17]=656 freq[18]=618 freq[19]=637 freq[20]=656 freq[21]=631 freq[22]=650 freq[23]=656
freq[24]=631 freq[25]=537 freq[26]=656 freq[27]=631 freq[28]=587 freq[29]=656 freq[30]=612 freq[31]=650
freq[32]=656 freq[33]=631 freq[34]=650 freq[35]=656 freq[36]=631 freq[37]=656 freq[38]=656 freq[39]=631
freq[40]=656 freq[41]=656 freq[42]=543 freq[43]=656 freq[44]=656 freq[45]=568 freq[46]=656 freq[47]=656
freq[48]=631 freq[49]=568 freq[50]=656 freq[51]=631 freq[52]=625 freq[53]=656 freq[54]=631 freq[55]=656
freq[56]=656 freq[57]=631 freq[58]=656 freq[59]=656 freq[60]=631 freq[61]=656 freq[62]=656
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25912
last_nonce_num:14370
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25987
last_nonce_num:14368
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=907 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=909 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=911
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[08]=907
core[049]=7 core[053]=5 core[056]=7
asic[19]=909
core[064]=7 core[112]=6
asic[55]=911
core[007]=7
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57447
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26183
last_nonce_num:35748
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=217 total_tv_end_sys=218
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=72.5110 Asic[02]=68.6020 Asic[03]=74.4230 Asic[04]=74.6750 Asic[05]=71.4540 Asic[06]=77.5610 Asic[07]=74.7760 Asic[08]=74.3900
Asic[09]=77.7790 Asic[10]=76.7220 Asic[11]=73.8020 Asic[12]=68.5850 Asic[13]=76.1680 Asic[14]=72.4770 Asic[15]=73.0470 Asic[16]=57.8810
Asic[17]=74.4740 Asic[18]=76.4530 Asic[19]=67.8800 Asic[20]=70.1280 Asic[21]=73.7520 Asic[22]=74.6580 Asic[23]=73.6850 Asic[24]=78.5170
Asic[25]=73.6850 Asic[26]=63.6860 Asic[27]=80.9660 Asic[28]=73.9200 Asic[29]=68.9870 Asic[30]=75.6310 Asic[31]=74.9770 Asic[32]=69.4570
Asic[33]=74.6580 Asic[34]=79.8930 Asic[35]=76.6710 Asic[36]=74.3730 Asic[37]=66.6050 Asic[38]=76.7380 Asic[39]=71.4540 Asic[40]=69.3060
Asic[41]=72.5610 Asic[42]=73.8530 Asic[43]=58.9210 Asic[44]=75.3800 Asic[45]=73.1310 Asic[46]=68.4000 Asic[47]=77.6780 Asic[48]=73.1150
Asic[49]=69.2890 Asic[50]=62.8130 Asic[51]=74.2720 Asic[52]=73.1480 Asic[53]=67.4440 Asic[54]=72.4940 Asic[55]=68.1990 Asic[56]=72.4100
Asic[57]=75.3460 Asic[58]=66.1350 Asic[59]=72.9800 Asic[60]=78.1480 Asic[61]=72.3260 Asic[62]=72.5610 Asic[63]=77.7950
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=67.6620 Asic[02]=75.9840 Asic[03]=70.3300 Asic[04]=75.5640 Asic[05]=62.8470 Asic[06]=70.2790 Asic[07]=74.5240 Asic[08]=72.9130
Asic[09]=70.6320 Asic[10]=72.5610 Asic[11]=73.9370 Asic[12]=77.3420 Asic[13]=72.4440 Asic[14]=68.8030 Asic[15]=73.0810 Asic[16]=73.8360
Asic[17]=73.5510 Asic[18]=73.9700 Asic[19]=71.0340 Asic[20]=71.1680 Asic[21]=72.1580 Asic[22]=78.8190 Asic[23]=71.9230 Asic[24]=69.4570
Asic[25]=67.7630 Asic[26]=71.7220 Asic[27]=76.4030 Asic[28]=71.1180 Asic[29]=68.7360 Asic[30]=69.7090 Asic[31]=77.5610 Asic[32]=70.1790
Asic[33]=67.9140 Asic[34]=72.3930 Asic[35]=64.5920 Asic[36]=72.1920 Asic[37]=74.6080 Asic[38]=75.4470 Asic[39]=73.8700 Asic[40]=73.9370
Asic[41]=66.2860 Asic[42]=79.4230 Asic[43]=75.8160 Asic[44]=68.6350 Asic[45]=74.7920 Asic[46]=70.7990 Asic[47]=71.2360 Asic[48]=73.8700
Asic[49]=66.5380 Asic[50]=70.6150 Asic[51]=72.6280 Asic[52]=75.7490 Asic[53]=71.8400 Asic[54]=76.5370 Asic[55]=73.5340 Asic[56]=69.2390
Asic[57]=75.1280 Asic[58]=74.3230 Asic[59]=73.4330 Asic[60]=72.3430 Asic[61]=77.6780 Asic[62]=82.4600 Asic[63]=69.5240
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=73.5510 Asic[02]=75.9160 Asic[03]=80.1110 Asic[04]=76.9900 Asic[05]=76.1510 Asic[06]=73.5170 Asic[07]=74.9940 Asic[08]=73.1150
Asic[09]=70.6650 Asic[10]=70.6990 Asic[11]=72.4770 Asic[12]=70.1450 Asic[13]=74.3060 Asic[14]=71.8060 Asic[15]=74.7420 Asic[16]=75.6650
Asic[17]=76.8220 Asic[18]=69.5240 Asic[19]=72.0910 Asic[20]=75.2620 Asic[21]=72.0240 Asic[22]=73.2660 Asic[23]=76.2690 Asic[24]=69.9440
Asic[25]=67.7290 Asic[26]=71.7050 Asic[27]=74.6250 Asic[28]=78.2320 Asic[29]=69.8430 Asic[30]=68.4670 Asic[31]=71.5210 Asic[32]=68.9540
Asic[33]=74.6250 Asic[34]=71.8730 Asic[35]=74.4400 Asic[36]=74.8760 Asic[37]=73.9030 Asic[38]=72.9300 Asic[39]=69.6250 Asic[40]=74.9430
Asic[41]=72.7620 Asic[42]=69.4910 Asic[43]=67.4270 Asic[44]=71.4870 Asic[45]=74.4570 Asic[46]=66.6550 Asic[47]=67.5450 Asic[48]=75.4800
Asic[49]=72.2590 Asic[50]=72.9300 Asic[51]=75.6820 Asic[52]=71.9070 Asic[53]=67.9640 Asic[54]=67.8470 Asic[55]=74.3900 Asic[56]=71.0010
Asic[57]=75.8490 Asic[58]=74.9270 Asic[59]=72.3930 Asic[60]=74.3730 Asic[61]=75.5310 Asic[62]=73.8190 Asic[63]=72.4440
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=70
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
Chain[6] Chip[62] local Temp=60
Chain[6] Chip[62] middle Temp=72
Special fix Chain[6] Chip[62] middle Temp = 75
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=62
Chain[7] Chip[62] middle Temp=72
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 74
read_temp_func Done!
CRC error counter=0
submitted by Timsierramist to BitcoinMining [link] [comments]

Antminer S9 not hashing?

Good morning folks,
I have an Antminer S9 that has performed flawlessly. After I moved it to a better location, I noticed that it no longer seems to be working. The green light is flashing, but it doesn't seem to be hashing to my pool (Nicehash).
I'm fairly new to Bitcoining mining and can't make sense of some of the information on my status screen. Before I jump into Bitmain support, I was wondering if anyone could clue me in as to what the problem might be.
https://s15.postimg.cc/i0n5qsyoInked_Capture_LI.jpg
I'll post my Kernal Log here.
Thank you in advance!!!
KERNAL LOG: [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000308] ps7-ttc #0 at f0006000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000658] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040436] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042612] CPU: Testing write buffer coherency: ok
[ 0.042974] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043036] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043263] L310 cache controller enabled
[ 0.043282] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121037] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210357] Brought up 2 CPUs
[ 0.210376] SMP: Total of 2 processors activated.
[ 0.210385] CPU: All CPU(s) started in SVC mode.
[ 0.211051] devtmpfs: initialized
[ 0.213481] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214724] regulator-dummy: no parameters
[ 0.223736] NET: Registered protocol family 16
[ 0.226067] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228361] cpuidle: using governor ladder
[ 0.228374] cpuidle: using governor menu
[ 0.235908] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237453] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237572] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.259435] bio: create slab at 0
[ 0.261172] vgaarb: loaded
[ 0.261915] SCSI subsystem initialized
[ 0.262814] usbcore: registered new interface driver usbfs
[ 0.262985] usbcore: registered new interface driver hub
[ 0.263217] usbcore: registered new device driver usb
[ 0.263743] media: Linux media interface: v0.10
[ 0.263902] Linux video capture interface: v2.00
[ 0.264150] pps_core: LinuxPPS API ver. 1 registered
[ 0.264162] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[[email protected]](mailto:[email protected])>
[ 0.264286] PTP clock support registered
[ 0.264656] EDAC MC: Ver: 3.0.0
[ 0.265719] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268708] DMA-API: preallocated 4096 debug entries
[ 0.268724] DMA-API: debugging enabled by kernel config
[ 0.268820] Switched to clocksource arm_global_timer
[ 0.289596] NET: Registered protocol family 2
[ 0.290280] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.290375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.290535] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.290612] TCP: reno registered
[ 0.290633] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290689] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290971] NET: Registered protocol family 1
[ 0.291346] RPC: Registered named UNIX socket transport module.
[ 0.291359] RPC: Registered udp transport module.
[ 0.291368] RPC: Registered tcp transport module.
[ 0.291376] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291391] PCI: CLS 0 bytes, default 64
[ 0.291857] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293945] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.295408] bounce pool size: 64 pages
[ 0.296323] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296525] msgmni has been set to 1486
[ 0.297330] io scheduler noop registered
[ 0.297343] io scheduler deadline registered
[ 0.297385] io scheduler cfq registered (default)
[ 0.308358] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308380] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.434378] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.006815] console [ttyPS0] enabled
[ 1.011106] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.018731] [drm] Initialized drm 1.1.0 20060810
[ 1.036029] brd: module loaded
[ 1.045494] loop: module loaded
[ 1.055163] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060985] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.068779] libphy: XEMACPS mii bus: probed
[ 1.073341] ------------- phy_id = 0x3625e62
[ 1.078112] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.087072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.093912] ehci-pci: EHCI PCI platform driver
[ 1.101155] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.107952] usbcore: registered new interface driver usb-storage
[ 1.114850] mousedev: PS/2 mouse device common for all mice
[ 1.120975] i2c /dev entries driver
[ 1.127946] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.133474] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.139426] Xilinx Zynq CpuIdle Driver started
[ 1.144261] sdhci: Secure Digital Host Controller Interface driver
[ 1.150384] sdhci: Copyright(c) Pierre Ossman
[ 1.154700] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.161601] mmc0: no vqmmc regulator found
[ 1.165614] mmc0: no vmmc regulator found
[ 1.208845] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.217539] usbcore: registered new interface driver usbhid
[ 1.223054] usbhid: USB HID core driver
[ 1.227806] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.234107] nand: Micron MT29F2G08ABAEAWP
[ 1.238074] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.244027] Bad block table found at page 131008, version 0x01
[ 1.250251] Bad block table found at page 130944, version 0x01
[ 1.256303] 3 ofpart partitions found on MTD device pl353-nand
[ 1.262080] Creating 3 MTD partitions on "pl353-nand":
[ 1.267174] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.275230] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.282582] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.291630] TCP: cubic registered
[ 1.294869] NET: Registered protocol family 17
[ 1.299597] Registering SWP/SWPB emulation handler
[ 1.305497] regulator-dummy: disabling
[ 1.309875] UBI: attaching mtd1 to ubi0
[ 1.836565] UBI: scanning is finished
[ 1.848221] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.855302] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.862063] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.868728] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875605] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881586] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.888693] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1134783803
[ 1.897736] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.906953] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.906959] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.911038] ALSA device list:
[ 1.911042] No soundcards found.
[ 1.927420] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.956473] UBIFS: recovery needed
[ 2.016970] UBIFS: recovery completed
[ 2.020709] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.026635] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.035771] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.045653] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.050693] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.061987] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.069184] devtmpfs: mounted
[ 2.072297] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.920928] random: dd urandom read with 0 bits of entropy available
[ 3.318860]
[ 3.318860] bcm54xx_config_init
[ 3.928853]
[ 3.928853] bcm54xx_config_init
[ 7.929682] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.935787] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.563181] In axi fpga driver!
[ 22.566260] request_mem_region OK!
[ 22.569676] AXI fpga dev virtual address is 0xf01fe000
[ 22.574751] *base_vir_addr = 0x8c510
[ 22.590723] In fpga mem driver!
[ 22.593791] request_mem_region OK!
[ 22.597361] fpga mem virtual address is 0xf3000000
[ 23.408156]
[ 23.408156] bcm54xx_config_init
[ 24.038071]
[ 24.038071] bcm54xx_config_init
[ 28.038487] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.044593] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8118b4c610358854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[15] has core num=5
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[17] has core num=8
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[8] has core num=13
Chain[7] ASIC[9] has core num=11
Chain[7] ASIC[13] has core num=11
Chain[7] ASIC[19] has core num=14
Chain[7] ASIC[30] has core num=6
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[42] has core num=2
Chain[7] ASIC[55] has core num=1
Chain[7] ASIC[57] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=108 on chain[5], value=880
get PIC voltage=74 on chain[6], value=900
get PIC voltage=108 on chain[7], value=880
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1643 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8118b4c610358854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J6] has backup chain_voltage=880
Chain[J6] test patten OK temp=-126
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-120
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J8] has backup chain_voltage=880
Chain[J8] test patten OK temp=-125
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=108 value=880
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J8] orignal chain_voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[15] has core num=5
Chain[J7] has core num in PIC
Chain[J7] ASIC[17] has core num=8
Chain[J8] has core num in PIC
Chain[J8] ASIC[8] has core num=13
Chain[J8] ASIC[9] has core num=11
Chain[J8] ASIC[13] has core num=11
Chain[J8] ASIC[19] has core num=14
Chain[J8] ASIC[30] has core num=6
Chain[J8] ASIC[32] has core num=1
Chain[J8] ASIC[42] has core num=2
Chain[J8] ASIC[55] has core num=1
Chain[J8] ASIC[57] has core num=2
miner total rate=13999GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:681 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:681 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:675
Asic[ 9]:618 Asic[10]:631 Asic[11]:681 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:675 Asic[18]:618 Asic[19]:637 Asic[20]:675 Asic[21]:631 Asic[22]:650 Asic[23]:687 Asic[24]:631
Asic[25]:537 Asic[26]:687 Asic[27]:631 Asic[28]:587 Asic[29]:687 Asic[30]:612 Asic[31]:650 Asic[32]:687
Asic[33]:631 Asic[34]:650 Asic[35]:687 Asic[36]:631 Asic[37]:662 Asic[38]:693 Asic[39]:631 Asic[40]:662
Asic[41]:662 Asic[42]:543 Asic[43]:668 Asic[44]:693 Asic[45]:568 Asic[46]:675 Asic[47]:700 Asic[48]:631
Asic[49]:568 Asic[50]:700 Asic[51]:631 Asic[52]:625 Asic[53]:700 Asic[54]:631 Asic[55]:675 Asic[56]:662
Asic[57]:631 Asic[58]:662 Asic[59]:687 Asic[60]:631 Asic[61]:681 Asic[62]:700
Chain:5 max freq=700
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:637 Asic[14]:656 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:637 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:637 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:650 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:650 Asic[56]:662
Asic[57]:650 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:650 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:656 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:656
Asic[ 9]:618 Asic[10]:631 Asic[11]:656 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:656 Asic[18]:618 Asic[19]:637 Asic[20]:656 Asic[21]:631 Asic[22]:650 Asic[23]:656 Asic[24]:631
Asic[25]:537 Asic[26]:656 Asic[27]:631 Asic[28]:587 Asic[29]:656 Asic[30]:612 Asic[31]:650 Asic[32]:656
Asic[33]:631 Asic[34]:650 Asic[35]:656 Asic[36]:631 Asic[37]:656 Asic[38]:656 Asic[39]:631 Asic[40]:656
Asic[41]:656 Asic[42]:543 Asic[43]:656 Asic[44]:656 Asic[45]:568 Asic[46]:656 Asic[47]:656 Asic[48]:631
Asic[49]:568 Asic[50]:656 Asic[51]:631 Asic[52]:625 Asic[53]:656 Asic[54]:631 Asic[55]:656 Asic[56]:656
Asic[57]:631 Asic[58]:656 Asic[59]:656 Asic[60]:631 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:6 max freq=637
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:7 max freq=643
Chain:7 min freq=637
max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:26 remote:27 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:26 remote:27 offset:29
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:26 remote:28 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
miner rate=13501 voltage limit=900 on chain[5]
get PIC voltage=880 on chain[5], check: must be < 900
miner rate=13501 voltage limit=900 on chain[6]
get PIC voltage=900 on chain[6], check: must be < 900
miner rate=13501 voltage limit=900 on chain[7]
get PIC voltage=880 on chain[7], check: must be < 900
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=880 [108]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=618 freq[01]=631 freq[02]=650 freq[03]=618 freq[04]=631 freq[05]=656 freq[06]=618 freq[07]=631
freq[08]=656 freq[09]=618 freq[10]=631 freq[11]=656 freq[12]=631 freq[13]=637 freq[14]=606 freq[15]=487
freq[16]=637 freq[17]=656 freq[18]=618 freq[19]=637 freq[20]=656 freq[21]=631 freq[22]=650 freq[23]=656
freq[24]=631 freq[25]=537 freq[26]=656 freq[27]=631 freq[28]=587 freq[29]=656 freq[30]=612 freq[31]=650
freq[32]=656 freq[33]=631 freq[34]=650 freq[35]=656 freq[36]=631 freq[37]=656 freq[38]=656 freq[39]=631
freq[40]=656 freq[41]=656 freq[42]=543 freq[43]=656 freq[44]=656 freq[45]=568 freq[46]=656 freq[47]=656
freq[48]=631 freq[49]=568 freq[50]=656 freq[51]=631 freq[52]=625 freq[53]=656 freq[54]=631 freq[55]=656
freq[56]=656 freq[57]=631 freq[58]=656 freq[59]=656 freq[60]=631 freq[61]=656 freq[62]=656
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25912
last_nonce_num:14370
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25987
last_nonce_num:14368
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=907 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=909 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=911
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[08]=907
core[049]=7 core[053]=5 core[056]=7
asic[19]=909
core[064]=7 core[112]=6
asic[55]=911
core[007]=7
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57447
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26183
last_nonce_num:35748
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=217 total_tv_end_sys=218
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=72.5110 Asic[02]=68.6020 Asic[03]=74.4230 Asic[04]=74.6750 Asic[05]=71.4540 Asic[06]=77.5610 Asic[07]=74.7760 Asic[08]=74.3900
Asic[09]=77.7790 Asic[10]=76.7220 Asic[11]=73.8020 Asic[12]=68.5850 Asic[13]=76.1680 Asic[14]=72.4770 Asic[15]=73.0470 Asic[16]=57.8810
Asic[17]=74.4740 Asic[18]=76.4530 Asic[19]=67.8800 Asic[20]=70.1280 Asic[21]=73.7520 Asic[22]=74.6580 Asic[23]=73.6850 Asic[24]=78.5170
Asic[25]=73.6850 Asic[26]=63.6860 Asic[27]=80.9660 Asic[28]=73.9200 Asic[29]=68.9870 Asic[30]=75.6310 Asic[31]=74.9770 Asic[32]=69.4570
Asic[33]=74.6580 Asic[34]=79.8930 Asic[35]=76.6710 Asic[36]=74.3730 Asic[37]=66.6050 Asic[38]=76.7380 Asic[39]=71.4540 Asic[40]=69.3060
Asic[41]=72.5610 Asic[42]=73.8530 Asic[43]=58.9210 Asic[44]=75.3800 Asic[45]=73.1310 Asic[46]=68.4000 Asic[47]=77.6780 Asic[48]=73.1150
Asic[49]=69.2890 Asic[50]=62.8130 Asic[51]=74.2720 Asic[52]=73.1480 Asic[53]=67.4440 Asic[54]=72.4940 Asic[55]=68.1990 Asic[56]=72.4100
Asic[57]=75.3460 Asic[58]=66.1350 Asic[59]=72.9800 Asic[60]=78.1480 Asic[61]=72.3260 Asic[62]=72.5610 Asic[63]=77.7950
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=67.6620 Asic[02]=75.9840 Asic[03]=70.3300 Asic[04]=75.5640 Asic[05]=62.8470 Asic[06]=70.2790 Asic[07]=74.5240 Asic[08]=72.9130
Asic[09]=70.6320 Asic[10]=72.5610 Asic[11]=73.9370 Asic[12]=77.3420 Asic[13]=72.4440 Asic[14]=68.8030 Asic[15]=73.0810 Asic[16]=73.8360
Asic[17]=73.5510 Asic[18]=73.9700 Asic[19]=71.0340 Asic[20]=71.1680 Asic[21]=72.1580 Asic[22]=78.8190 Asic[23]=71.9230 Asic[24]=69.4570
Asic[25]=67.7630 Asic[26]=71.7220 Asic[27]=76.4030 Asic[28]=71.1180 Asic[29]=68.7360 Asic[30]=69.7090 Asic[31]=77.5610 Asic[32]=70.1790
Asic[33]=67.9140 Asic[34]=72.3930 Asic[35]=64.5920 Asic[36]=72.1920 Asic[37]=74.6080 Asic[38]=75.4470 Asic[39]=73.8700 Asic[40]=73.9370
Asic[41]=66.2860 Asic[42]=79.4230 Asic[43]=75.8160 Asic[44]=68.6350 Asic[45]=74.7920 Asic[46]=70.7990 Asic[47]=71.2360 Asic[48]=73.8700
Asic[49]=66.5380 Asic[50]=70.6150 Asic[51]=72.6280 Asic[52]=75.7490 Asic[53]=71.8400 Asic[54]=76.5370 Asic[55]=73.5340 Asic[56]=69.2390
Asic[57]=75.1280 Asic[58]=74.3230 Asic[59]=73.4330 Asic[60]=72.3430 Asic[61]=77.6780 Asic[62]=82.4600 Asic[63]=69.5240
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=73.5510 Asic[02]=75.9160 Asic[03]=80.1110 Asic[04]=76.9900 Asic[05]=76.1510 Asic[06]=73.5170 Asic[07]=74.9940 Asic[08]=73.1150
Asic[09]=70.6650 Asic[10]=70.6990 Asic[11]=72.4770 Asic[12]=70.1450 Asic[13]=74.3060 Asic[14]=71.8060 Asic[15]=74.7420 Asic[16]=75.6650
Asic[17]=76.8220 Asic[18]=69.5240 Asic[19]=72.0910 Asic[20]=75.2620 Asic[21]=72.0240 Asic[22]=73.2660 Asic[23]=76.2690 Asic[24]=69.9440
Asic[25]=67.7290 Asic[26]=71.7050 Asic[27]=74.6250 Asic[28]=78.2320 Asic[29]=69.8430 Asic[30]=68.4670 Asic[31]=71.5210 Asic[32]=68.9540
Asic[33]=74.6250 Asic[34]=71.8730 Asic[35]=74.4400 Asic[36]=74.8760 Asic[37]=73.9030 Asic[38]=72.9300 Asic[39]=69.6250 Asic[40]=74.9430
Asic[41]=72.7620 Asic[42]=69.4910 Asic[43]=67.4270 Asic[44]=71.4870 Asic[45]=74.4570 Asic[46]=66.6550 Asic[47]=67.5450 Asic[48]=75.4800
Asic[49]=72.2590 Asic[50]=72.9300 Asic[51]=75.6820 Asic[52]=71.9070 Asic[53]=67.9640 Asic[54]=67.8470 Asic[55]=74.3900 Asic[56]=71.0010
Asic[57]=75.8490 Asic[58]=74.9270 Asic[59]=72.3930 Asic[60]=74.3730 Asic[61]=75.5310 Asic[62]=73.8190 Asic[63]=72.4440
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=70
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
Chain[6] Chip[62] local Temp=60
Chain[6] Chip[62] middle Temp=72
Special fix Chain[6] Chip[62] middle Temp = 75
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=62
Chain[7] Chip[62] middle Temp=72
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 74
read_temp_func Done!
CRC error counter=0
submitted by Timsierramist to BITMAIN [link] [comments]

Cryptocurrency Market - The Biggest Trends to watch out for 2018-2025

New market research study provides an analysis and evaluation of the current and prospective profitability, liquidity and financial stability of Global Cryptocurrency Industry.
Cryptocurrency is a digital currency which operates on cryptographic techniques to complete safe transaction. Being decentralized with no governing body/central body involved in verifying transaction, secured protection and producing new currencies are projected to be the major reason for the market growth over the forecast period. Moreover, cryptocurrency’s community which include miners/stakers, developers, service providers, users etc. drive the governance of cryptocurrencies. The positive feedback loop has made the community more homogenous.
Globally, cryptocurreny has been selected as digital payment method for the future financial world. These convenient currencies are completely digital requiring online transaction unlike physical cash. Hustle free transaction and deduction in entire ownership cost are few key features propelling the industry.
Major drivers include authentication, ease of transaction, complete security, faster international transaction are expected to spur the market growth with steady performance. Moreover, the industry has not been confined with government rules, exchange rates, interest rates or international transaction fee, hence, making the currency more convenient for application.
The currencies can also be transferred digitally via devices such as smartphones, since they are completely unrestricted from any centralized bank/authorities. Vendors and consumers prefer virtual money for making payments, henceforth, creating new opportunities for the market growth.
Get PDF with Technological trends at https://www.xpodenceresearch.com/Request-Sample/105813
Tax-free & compliance-free transactions, lesser chances of identity theft & fraud and negligible fee charged for cryptocurreny transaction are few other key elements augmenting the industry growth over the forecast period. Moreover, lack of awareness among the people and stringent rules and regulations for application of robots in various countries is expected to restrain the market growth. The emerging industry is projected to grow over the forecast period with more public awareness and continuous increase of new market players with innovative product/services.
The market has been segmented into type of currency, mining types, and application. The type of currency segment includes Bitcoin, Litecoin, Ethereum, Ripple, and others. Mining type is segregated into solo and pool mining. The application segment includes banking, real estate, stock market and virtual currency. Other application for the market includes retail sector, gaming industry, education, logistics & transportation, BFSI, tourism sector, media and entertainment industry. BFSI is expected to acquire the major share followed by retail sector operating on cryptocurrencies. The cryptocurrency mining hardware includes Central Processing Unit (CPU) mining, Graphics Processing Unit (GPU) mining, Field-Program Gate Array (FPGA) mining, and Application-Specific Integrated Circuit (ASIC) mining. ASIC mining can calculate 10,000 times faster than conventional CPU mining.
Increasing acceptance and potential growth for this industry have attracted various small vendors globally for competing in the market. Apart from Bitcoin, Litcoin has also gained prominence in the market over last few years, there are plenty of vendors in the market namely as Litecoin, Namecoin, Novacoin, Peercoin, Ripple, Steller, Primecoin, Megacoin, and many others.
Geographically, the market is expended across North America (U.S., Mexico, and Canada), Europe (UK, France, Germany, and rest of Europe), Asia-Pacific (China, Japan, India, Australia, and rest of Asia-Pacific), and MEA (Middle East, Latin America, and Africa). North America region dominates the market owing to the regulations offered by the government. Brazil and Canada are other major regions using cryptocurreny due to rules and regulations
Obtain Report Details with technological advancement at https://www.xpodenceresearch.com/Reports/Cryptocurrency-Market
Key market players include Intel Corporation, Microsoft Corporation, Xilinx, Inc., NVIDIA Corporation, 21 Inc. AlphaPoint Corporation , Amazon.com, Inc., Advanced Micro Devices, Inc, BTL Group Ltd.(Blockchain Tech), BitGo, BitFury Group , Coinbase UK, Ltd. Coinsecure, Unocoin, Coinbase, Bitstamp Ltd., Zebpay,, Poloniex Inc., Bitfury Group Limited, Global Area Holding Inc., Digital Limited, IBM Corp, are the other niche players.
About Us:
Xpodence Research is a U.S. based Market Research Company and offers the most extensive collection of progressive surveying syndicated and customized research reports of various categories for private and public industries across the globe.
We offer the comprehensive market research solution for all the industries by performing the in-depth study of industry trends, verticals globally. We believe in building an eternal bond with our customers through providing them inclusive research study both customized and syndicated based on their specific requirements.
The organizations in every industry such as Technology, Pharmaceuticals, Consumable Goods, Food & Beverage and others demands a market-based solutions for various significant decisions based on productivity and output globally. Our services are tailored specifically to our clients by proposing them the potential outcome, based on our in-depth analysis and insights for exploring the growth strategies through providing the best possible decision for quality production.
Contact Us:
Xpodence Research
244, Madison Avenue
New York City, NY - 10016
United States
Toll Free +1- 844-445-2861
Email: [[email protected]](mailto:[email protected])
submitted by mansee36 to u/mansee36 [link] [comments]

FPGA mining?

Has anyone thought about using FPGAs to mine litecoins? In particular, I was thinking about Xilinx Vertex FPGAs, which have large amount of block RAM, which might be useful for the litecoin RAM-intensive hashing algorithm. However, they don't have enough block RAM to saturate the logic with hash units, so you'd still need a board with off-chip RAM, although not much. On the downside, they are much more expensive than the Spartan FPGAs most FPGA Bitcoin miners seem to be using.
submitted by mian2zi3 to litecoinmining [link] [comments]

Minar Bitcoins con un FPGA Altera DE1 Real Time Data Mining on FPGA 10Gh/s 0xBitcoin Mining on FPGA Unboxing the Xilinx VCU1525 FPGA - Crypto Mining! FPGA MINING BUILD 2018.

Bitcoin mining software for ZTEX USB-FPGA Modules 1.15 . BTCMiner is an Open Source Bitcoin Miner for ZTEX USB-FPGA-Modules 1.15b and 1.15d and USB-FPGA-Modules 1.15x. The latter variant is optimized for cryptographic computations such as Bitcoin Mining and allows to build up FPGA clusters using standard components (USB cables and USB hubs). As a GPU miner myself, I was both curious and concerned about the growing FPGA mining ecosystem. After weeks of research and testing, we compiled the first version of the FPGA.guide to share what we've learned so far. This is now the fourth revision of FPGA.guide. Re: Virtex 7 as bitcoin miner, how many gigahashes All other things aside, maximum board size is probably limited by what your PCB manufacturer can handle. For some inspiration, Enterpoint sell a PCI-e card with 24 Spartan-6 FPGAs , and a great big board with up 100 Spartan-3As . Bitmain produces Bitcoin mining machines along with the largest mines and hash rate tradeoff platform products plus services for the virtual currency mining industry. Low power mining machines. Zynq SoCs act as the master control system for Bitmain’s mining machines, offering high performance at a low BOM cost. First Eco-Friendly Crypto Miner. With under 20 Watt power consumption, AtomMiner AM01 is probably the only green miner available on the market. We've designed it in a way so you can easily hook it up to to your existing renewable energy outlet like solar panels, wind turbines or geo-thermal plants.

[index] [525] [18022] [21817] [27400] [26080] [14558] [25278] [27810] [6267] [7722]

Minar Bitcoins con un FPGA Altera DE1

Lancelot FPGA Bitcoin Miner Unboxing Feel free to donate to keep more Tutorials coming: ... 8 x Xilinx VCU1525 FPGA Crypto-Mining Rig Demo - Duration: 8:35. Zetheron Technology 45,638 views. Cracked the 10Gh/s barrier mining 0xBitcoin on the Xilinx VCU1525 FPGA. I used a antminer fan and created a DIY cardboard funnel to help with the additional cooling. I'll be adding a rear heatsink ... Design and Implementation of a Bitcoin Miner Using FPGAs - Duration: 12:41. ... 8 x Xilinx VCU1525 FPGA Crypto-Mining Rig Demo - Duration: 8:35. Zetheron Technology 45,971 views. Gidel FPGA acceleration platforms company and Xelera a big data analytics acceleration company are joining forces to show a complete data flow for Real Time Data Mining on FPGA targeting the Data ... Unboxing the Xilinx VCU1525 FPGA. This massive FPGA is going to be used for cryptocurrency mining. I will be posting more on this card and getting it mining.

Flag Counter