A complete beginners guide to installing a Bitcoin Full

#Reddcoin ($RDD) Core Wallet Release 3.0.1 - PosV v2 SuperMajority Consensus Upgrade at 45.6% - Required Upgrade

Reddcoin (RDD) Core Wallet v3.0.1 - January 09, 2020
Version 3.0.1 is the official release version of Reddcoin Core. It is available for download at Reddcoin Core's Github repository here: https://github.com/reddcoin-project/reddcoin/releases/tag/v3.0.1
This release features PoSV v2.supermajority activation and new staking ruleset (and minor misc fixes). v3.0.1 is still not yet MacOS Catalina compatible. We are still working and should have that fix issued very soon. Sincere apologies to our Mac-using ReddHeads.
It is particularly important that all users upgrade, as once PoSV v2 is enforced, version 4 blocks will be rejected from the network entirely.
Therefore v3.0.1 is a "strongly recommended" update for all users. Note: If you have already installed v3.0.0, this upgrade is not required. If you have not yet upgraded from v2.0.x or earlier, this is a REQUIRED upgrade. Please install the newest version v3.0.1 to avoid losing functionality during supermajority activation of PoSV v2.
Reddcoin Core version 3.0.1 is now available from: https://github.com/reddcoin-project/reddcoin/releases Release Notes are available here and replicated below in this announcement: https://github.com/reddcoin-project/reddcoin/blob/mastedoc/release-notes.md
This is a new major version release of Reddcoin.
Previously, the original and subsequent versions of Reddcoin were taken from a fork of the Litecoin code base.
With the release of Reddcoin V2.0.0, the code was based directly from a fork of Bitcoin. This allows for better source control and feature implementation from upstream changes into the future
With the release of Reddcoin V3.0.0, the PoSV stake reward has been improved to allow for a target 5% network growth, in process re-incentivizing individual network stakers and providing for integrated dev support.
Upgrading to this release is strongly recommended and required for continued operation. Once a supermajority of 90% is reached, old wallets will no longer accept the new v5 blocks.
Please report bugs using the issue tracker at github:
https://github.com/reddcoin-project/reddcoin/issues
How to Upgrade
If you are running an older version of Reddcoin, shut it down. Wait until it has completely shut down (which may take a few minutes for older versions). Run the installer (on Windows) or just copy over /Applications/Reddcoin-Qt (on Mac) or reddcoind/reddcoin-qt (on Linux).
Start wallet. All done!
Reddcoin v3.0.0 introduced an updated PoSV method to better distribute staking rewards and target a overall 5% network growth. Staking and relay policy enhancements 
To implement PoSV v2, Reddcoin Core's block templates are now for version 5 blocks only. When PoSV v2 consensus (Supermajority 9000/10000) is reached, only v5 blocks will be accepted by the network.This equates to approximately 90% of blocks being generated over 1 week period. Status at any time may be viewed in node debug.log
Blockchain Download:
Blockchain data for both testnet and mainnet along with instructions can be downloaded from github. https://github.com/reddcoin-project/bootstrap_files
3.0.1 changelog
*83e212838 - John Nash, 2020-01-09 : really delete these files *3a1458ecd - Oliver Webb, 2020-01-08 : Added missing dependency libminiupnpc-dev for Jessie *d21915431 - Tiago Peralta, 2019-06-21 : Add vout to listtransactions/gettransaction *8d58ea7cf - Oliver Webb, 2020-01-08 : Script for downloading pre compiled binaries for Raspbian Jessie, Stretch or Buster *d4eced1bc - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_stretch.sh *c5e9f91cf - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_jessie.sh *5d5771b00 - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_buster.sh *75c6ae91b - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *54c501787 - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *acb30a2b6 - Oliver Webb, 2020-01-05 : script files for Raspbian Jessie (also Stakebox) *cfddbe594 - John Nash, 2020-01-05 : Update copyright year and version *e46e5e7de - John Nash, 2020-01-05 : download script for pre compiled wallet *37386790a - John Nash, 2020-01-05 : change libssl deb packages links to github *9dbc772e6 - Oliver Webb, 2020-01-03 : download script for pre compiled wallet *857d697fd - Oliver Webb, 2020-01-03 : change libssl deb packages links to github *2cb74b9a8 - John Nash, 2019-12-31 : update copyright year *c641a1ab3 - Oliver Webb, 2019-12-30 : Raspberry Pi build script files for v3 wallet *a3f21a4a4 - John Nash, 2019-12-30 : add install script for building db4 update instructions for unix, osx, arm building using the db4 install script *5f6299b2a - John Nash, 2019-12-28 : docs: Update build notes for arm processors *465716c01 - John Nash, 2019-12-28 : test for arm devices *3fec3a535 - John Nash, 2018-02-02 : build: update source paths *5f6031ab4 - John Nash, 2019-12-28 : Scrypt n=1024 Pow hash based upon Colin Percival's Tarnsnap (2009) Modified by Artforz, coblee, pooler, wtogami, Nikolay Belikov, reddink *2fd4d91a0 - John Nash, 2019-12-24 : update copyright year *326828b36 - John Nash, 2019-12-24 : set release state true *8ebede0a6 - John Nash, 2019-12-24 : release notes *36df6fdfb - John Nash, 2019-12-23 : add check explictly for v5 blocks or greater *874dc1f0c - John Nash, 2019-12-17 : remove hardcoded global variable rearrange debug log output *763b25db8 - John Nash, 2019-12-17 : move copyright to new line *536baf635 - John Nash, 2019-12-17 : update version and set release state to false *cde9009f3 - John Nash, 2019-12-17 : update copyright year *ae41b7ed3 - John Nash, 2019-12-17 : set isSuperMajority to 90% for mainnet *e43e1c8ed - John Nash, 2019-12-10 : additional logging to verify isSuperMajority in the debug.log output *e31783cac - John Nash, 2019-12-05 : add/update public key for mainnet *405c6f002 - John Nash, 2019-12-05 : add log output for current inflation rate *9cc43c3f7 - John Nash, 2019-12-02 : determine calculated stake based on posv version *7baa3bf75 - John Nash, 2019-11-25 : check the posv transaction for correct pubkey *9ffa7ca38 - John Nash, 2019-11-21 : check for posv v1 or posv v2 blocks when calculating stake reward *39f7aad68 - John Nash, 2019-11-14 : add logging *0e283e6c3 - John Nash, 2019-11-13 : correct maths *74cbdeffd - John Nash, 2019-11-11 : use new posv v2 functions addidtional logging *35d7413b5 - John Nash, 2019-11-11 : add new proofofstakereward *3d917216c - John Nash, 2019-11-11 : get inflation adjustment *f63d17443 - John Nash, 2019-11-08 : add the developer output split fund output *ca263c9c9 - John Nash, 2019-11-05 : add dev key to chainparams *df6996ab0 - John Nash, 2019-11-05 : add block version checking *14b663479 - John Nash, 2019-11-05 : increase block version
Credits
Thanks to everyone who contributed to coding, testing and feedback for this release, notably:
@cryptognasher @techadept @chris @cryptobuze @harmonyq @mindredder @paxtech @Tiago Peralta 
Stake on!!
-Reddcoin (RDD) Core Development Team
submitted by TechAdept to reddCoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

How to get Energi Wallet running on Raspberry Pi 4

How to get Energi Wallet running on Raspberry Pi 4
Hello,
I'm new to the Raspberry Pi and trying to get the NRG Core Cryptocurrency wallet running on my Raspberry. Finally I was able to compile the files after this commands:
Download and install the newest updates sudo apt-get update && sudo apt-get upgrade
Install the following major dependencies packages sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
Install the following QT dependencies packages sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
Install bitcoin PPA files cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
Add this line to the file: deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
Close file
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
Clone Github cd git clone https://github.com/energicryptocurrency/energi.git
Install Libdb4.8 Libdb4.8-dev Libdb++ Libdb4.8++-dev
Compile the wallet cd energi ./autogen.sh ./configure --with-boost-libdir=/uslib/arm-linux-gnueabihf make sudo make install
After compiling I see the files in /uslocal/bin
https://preview.redd.it/25m1nm8164k41.jpg?width=2016&format=pjpg&auto=webp&s=3dfec55b307187eea06a279e284a19a6ae5d6d37
No I need to know how to use this files? Can someone help me please?
submitted by FCU4ever to energicryptocurrency [link] [comments]

BTC Node. Need help with Ubuntu and BTC core program. To the Linux experts here in reddit.

The good thing of loosing a post, is that you have to retype everything and this means that you are able to shorten the post.
So. TLDR, I have 2 hdd, 80gb and 320, the second one has only, all the Blockchain info, from another already running node. I am not able to tell BTC Core program that the files are already there so he does not need to download 300gb. After hours of Google and linux forums, I am stuck in this issue. Every time I type "bitcoin-qt" on my terminal, it shows as a first download. Any help will be appreciate.

Full story.
English is not my first language, and this is being typed for second time (please have mercy on my grammar or misspelling mistakes), because I posted the question on linux subreddit nobody give a f..... so I decided to bring it here, posted a short post with the link and the automatic bot deleted because the of the link. I erased both the linux and the bitcoin post, and made a third one new, here, with plain text, copy pasting the info from the linux post. Never appeared on the "new" section of this sub. So hours of typing lost, and here we are.
Old Notebook. 80gb drive, and noob to Linux. Although I have some pc and logic knowledge, installed MINT due to a recommendation from a Bitcoin community, but since I have a friend with an already running node, with Ubuntu switched to this one, just to have the same system.
Once Ubuntu installed, on the 80gb and pc running, I copy and pasted the whole bitcoin folder from my friends pc to my 320 gb. Up to here all was good. But here is the problem

My friend, who does not understand nothing about linux, is owner of a company and has an IT guy who made everything for him, but would not be willing to help me a lot, (just to be good with his boss but right now it is not reachable for me), but when we where on my pc he told me that Linux is very sensitive to ports, in other words, a small usb change, will do a program to loose the path for the files. SO, instead of using the 320gb disk on USB i installed on this notebook second Hdd bay (its an old high end laptop with 2 sata connectors), he was able to set the program and everything went well for a couple of hours, Bitcoin Core program started synchronizing, downloading very little info.

I needed to turn of the pc to move it, so closed the program (waited until bitcoin core program told me was safe to) and turn it off, then turn it on again, and the problem was there, bitcoin core program started trying to download the whole blockchain in the spare 2gb of the 320 gb disk.
So what it seemed to happen is that even when the disk is installed on a sata bay from the motherboard, as I did not installed ubunutu with this disk connected it's route (adress?) is dinamyc and that is why BTC Core Program lost the files and does not recognize it.
After hours of google, linux forums and "askubuntu" i was able to, mount the 320gb disk, first editing the fstab ( i followed the guide in "askubuntu.com/questions/125257/how-do-i-add-an-additional-hard-drive") by the way. Trying to use VIM editor was a pain, it is REALLY difficult to type something there, and save it without pressing a wrong key. I had to cancel and start over at least a dozen times (plus reading several guides), but still was not able to mount the disk (Actually after following the steps, the hdd (320) disappeared from the GUI). went back, erased, and the did the NANO steps, and I THINK that now the hard drive it is fixed (before, any change,when restarting the second hdd took some time to appear, now it seems that is mounted and to a fixed adress). Well, after mounting the hdd, I tryed to call the bitcoin-qt and the initial download page appear and again tries to download from the initial block. I searched over hours "file association in ubuntu", "program files path" etc etc and the only thing I found is how to set up the desired software to open a file.

For you to understand my mess, when I did the "user:user" thing, I did not understand completely what I was doing, (yes I had to be in sudo) BUT i think I managed to did the correct thing as both hdd are shown in the Ubuntu GUI.

Some additional data is
Both hard drives are formated in Ext4
I have (I think that) a fstab.bak before any changes

I knwo that linux users sometimes ask for details on the system, just tell me the commands and i can run them to stick any info needed.

Thanks for the help in advance.
submitted by Cabe72000 to Bitcoin [link] [comments]

[IDEA] [PROPOSAL] Monero Debian (deb) packages / Debian package repository deb.getmonero.org (I can do)

I have the skills to implement this if wanted.
Possible User Experience
This is a proposal, i.e. not implemented yet. Instructions for users, simplified.
How to install monero using apt-get
Download the repository signing key.
wget https://www.getmonero.org/monero.asc
Add the signing key.
sudo apt-key --keyring /etc/apt/trusted.gpg.d/monero.gpg add ~/monero.asc
Add APT repository.
echo "deb https://deb.getmonero.org buster main" | sudo tee /etc/apt/sources.list.d/monero.list
Update your package lists.
sudo apt-get update
Install monero.
sudo apt-get install monero
A few technical implementation details
I would simply grab the binaries provided by getmonero.org, download them, check software (gpg) signatures, put these into deb packages, add these to a repository, and upload the repository.
What I would not do is creating the binaries during package creation. While this is nice to have, it doesn't help user experience and blocks the progress on reaching this goal. See next chapter.
Why simply put the pre-build Monero binaries into a deb package?
1) After bitcoin existing for more than 10 years, being popular and being in Debian unstable (sid) it still never made its way into Debian testing, let alone stable. Reason being explained that a difference in underlying libraries (even just security fixes) during compilation may result in a network split. Binaries compiled during packaging on different versions of Linux distributions might have different libraries that might cause a network fork / chain split.
References:
(Note: above website saying Tags: fixed-upstream is probably a mistake as discussion at bottom says.)
2) The github issue of packaging monero stalled.
3) By shipping the same binaries as provided by getmonero.org reduces the chances of introducing a backdoor.
Many Options
Timeline
Doable quickly. The electrum (bitcoin) AppImage was recently added to a Debian package (binaries-freedom) by me and is now easily installable in Whonix. Pre-installed in testers version of Whonix already.
About Me
I am the founder of Whonix, which I am maintaining at present for more than 7 years.
Whonix (formerly TorBOX) is a Debian GNU/Linux–based security-focused Linux distribution. It aims to provide privacy, security and anonymity on the internet.
You can see an overview of packages I am maintaining on my github profile.
To proof that this forum account adrelanos corresponds the same person maintaining whonix.org, it is added here.
Questions
What happened to, what is the successor of the forum funding system?
submitted by adrelanos to Monero [link] [comments]

[Lightning] I didn't believe it until I saw it

Moderately long post, tl;dr at the bottom.
I've seen lightning transaction gifs and videos over and over. Today, I decided to fire up a lightning node on my laptop and give it a shot.
I followed this walk-through for mac (I adapted it to Arch Linux) for setting up Bitcoin TestNet Node with Eclair Lightning (it's practically the same as Mac, except for the installation process). Running on Arch caused the problem of accidentally installing the latest dev version of Bitcoin Core (AUR:bitcoin-git) - also had some compilation issues because upstream moved some files and this hadn't been updated in the PKGBUILD.
The latest dev version of Bitcoin Core included the SegWit address generation by default, which was very nice, didn't have any bugs using it in the brief period I used it.
After a couple of hours of syncing the TestNet blocks on my laptop, I started up Eclair and got Eclair and Bitcoin Core connected (had to use bitcoin-qt --deprecatedrpc=addwitnessaddressbecuase Eclair calls a soon-to-be deprecated function), sent myself some tBTC, and started opening up channels. Once I had about 3 channels open, I went to everyone's favorite online coffee shop and rewarded myself with some imaginary coffee.
My mind was absolutely blown at how fast the transaction went through and how insanely low the fees were (10 sat).
I went to test a transaction with a couple more hops, bought myself an imaginary 100eur Steam voucher, paid 100 sat in fees, near instant transaction (my Eclair client took a couple seconds to find a route to bitrefill)
Lightning truly is an incredible addition to Bitcoin, big things are coming.
tl;dr - Saw a couple lightning transaction videos and gifs, didn't really sink in how amazing this really is, decided to give it a shot on linux, mind=blown
Edit: I've done a little further testing and noticed that Eclair doesn't warn you if you're opening a duplicate channel (open a second channel with the same node)
submitted by Kill3rism to Bitcoin [link] [comments]

Reddcoin on Raspberry Pi

A lot of user asked lately, how to run Reddcoin on the popular Raspberry Pi platform. Raspberry Pi is a cheap ARM computer (using junk leftover chips with 10 year lag in technology) but it has enough RAM and consumes around 5 watts, so its ideal to use it for Reddcoin Staking.
This tutorial is not from me, i take NO RESPONSIBILITY about these binaries or the accuracy. This tutorial is created by cryptoBUZE, a fellow member of the Reddcoin community.
Before attempting to follow this tutorial, do a sudo apt-get update
The following commands must be run to install dependencies:
sudo apt-get install libboost-thread-dev
sudo apt-get install libboost-program-options-dev
sudo apt-get install libboost-filesystem-dev
sudo apt-get install libboost-system-dev
Download and install older libssl version - bitcoin clones are using this glorious and fantastic communist product of openssl so it naturally does not works. Its getting totally incompatible after each relase even with itself. Therefore, you must install this, which is the compatible one with the wallet software (no, you cant even compile the code with the newer one) :
wget http://apt.screenlyapp.com/raspbian/pool/main/o/openssl/libssl1.0.0_1.0.1t-1%2Bdeb8u6_armhf.deb
wget http://apt.screenlyapp.com/raspbian/pool/main/o/openssl/libssl-dev_1.0.1t-1%2Bdeb8u6_armhf.deb
sudo dpkg -i libssl1.0.0_1.0.1t-1+deb8u6_armhf.deb
sudo dpkg -i libssl-dev_1.0.1t-1+deb8u6_armhf.deb
Download the wallet software itself:
wget https://github.com/cryptoBUZE/reddcoin/releases/download/raspberrypi/reddcoind
wget https://github.com/cryptoBUZE/reddcoin/releases/download/raspberrypi/reddcoin-cli
wget https://github.com/cryptoBUZE/reddcoin/releases/download/raspberrypi/reddcoin-qt
chmod +x reddcoin\*
When speaking about compatibility, ARM is similar to x86 if you are running user mode applications. You know that every arm based chip needs a different kernel due to the lack of an unified IO system thankfully for the glorious clueless egoistic communist developers at ARM, who succesfully bankrupted the corporation after 25 or so years, and the company got acquired by the japanese softbank. But in user mode, its sort of backward compatible if you have all the proper libraries installed. This means that this will run on any other newer ARM based machine as well (not just raspberry pi-s, on every other arm stuff, chromebooks, or android phones hacked to work with linux).
submitted by GeriGeriGeri to reddCoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Bitcoin stuck on broken wallet

I keep my bitcoin on a wallet on my Linux partition; recently, it failed to synchronize. I've tried sending a small test transaction to a wallet I have on my Windows partition; but the transaction never arrived.
Is there any way to access my bitcoin from my Windows wallet, without needing to send it over in the form of a transaction?
submitted by ElenTheMellon to BitcoinBeginners [link] [comments]

Games4coins.com .. a new service to buy Steam keys with BTX

Games4coins.com .. a new service to buy Steam keys with BTX
Artwork by Desing Team - Bitcore BTX ® 2018
Steam is a digital distribution platform developed by Valve Corporation offering digital rights management1 (DRM), multiplayer gaming and social networking services. Steam provides the user with installation and automatic updating of games on multiple computers, and community features such as friend lists and groups, cloud saving, and in-game voice and chat functionality.
If you purchase a game that uses Steam from another website as a digital download, you'll be given a product key that you use to activate the game on Steam. A Steam key is a unique code that you will use to access the full game2.
Bitcore BTX originally a hybrid fork of Bitcoin, features a proof-of work consensus mechanism and implements all of the BIPs (Bitcoin Improvement Proposals) of the Bitcoin protocol3.
Bitcore: The most clever Bitcoin fork” -- Jimmy Song, Bitcoin Core Developer
More exchanges are listing Bitcore (BTX) and businesses are adopting it. One of the latest cases of adoption of BTX is in purchasing Steam Games Key from Games4Coins.
Games4Coins is a platform that you can purchase Steam product keys. Buying a game on Games4Coins is really simple. Once you have selected a game, you can quickly and securely pay. Why we say quickly and securely? Because a powerful cryptocurrency, Bitcore (BTX) is accepted as a payment coin at this platform (Figure 1). Moreover, as a crypto, they accept only Bitcore.
Figure 1. Bitcore accepted in Games4Coins
After the transaction is complete, you gain full access to your purchased game key which is 15 letter+number code that would look something like this: 8GMR2-Q20YJ-9PDKL. Once you get that, you go into your steam app on your computer and go to Games > Activate a product on steam. Then it will have a space for you to put your code.
Bitcore is one Cryptocurrency with a big Future”. Games4Coins Team
There are totally forty seven steam games and you can pay via Bitcore for all games. Moreover the prices are very cheap, between 0.44303596 BTX and 5.41588852 BTX (Figure 2).
Figure 2. Some samples for the steam games and their price
Consequently, Bitcore is one of the best cryptos in the market. It is also one of the fastest cryptos in the market when compared to Bitcoin, Litecoin and many other top 10 cryptos. Given that transaction speeds are a factor in the applicability of crypto in real-world business usage, it then follows that Bitcore’s long-term prospects are quite good, as blockchain technology continues to gain a foothold in business. This kind of integrations could open the doors for other major businesses to adopt BTX as a payment method, further adding to the intrinsic value of this crypto. The future of Bitcore (BTX) looks great.
Author: Chris DEVTeam Bitcore | [[email protected]](mailto:[email protected])
Download PDF

GAMES4COINS HERE

References
1 https://en.wikipedia.org/wiki/Digital_rights_management
2 https://support.steampowered.com/kb_article.php?ref=5414-tfbn-1352
3 https://bitcore.cc/white-pape

https://preview.redd.it/0matv78hrml11.png?width=1440&format=png&auto=webp&s=e8596b7325dd200f5d5a098e83d9a918a7dc7848
Web: Official | News | Coin Specs | Roadmap | White Paper | Ecosystem | Network Update | Community | FAQ | Blog | TeamWallets: Windows | Win Wallet & Blockchain | Linux | Mac | iOS | Android | Eletrum | Zeltrez | Jaxx LibertyExchanges: Bit Z | Cryptopia | hitBTC | VE Bitcoin | Exrates | Crypto Bridge | QBTC | Coinexchange | Octaex | Bitexlive | Bitibu | Trade Satoshi | PayCML | ExcoincialServices: Livingroom of Satoshi | Kamoney | Cryptonaut | EasyRabBit.net | LuckyGames.io | InstaSwap Block Explorers: InsightAPI | Crypto ID | LiivenetMining Pools: Bitcorepool | Yiimp | Suprnova | Chainworks | Umine | Ant Mine Pool | Coin Miners | BSOD | BTXpool | Minersport | Omegapool | PoolGPUMarket Info: CoinMarketCap | World Coin Index | Cryptocompare Source: Github | Kryptowerk | DgCarlosLeon

submitted by dgcarlosleon to bitcore_btx [link] [comments]

Thank you for running your own VTC node and supporting VTC network! We now have 1394 Full Nodes, more than Litecoin

You guys are amazing! :) Thank you for running your own full VTC node and supporting VTC network! We now have 1394 Full Nodes :)
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Why Vertcoin? Learn about why ASIC Resistance matters! https://www.youtube.com/watch?v=UHXqfZWjuHI
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Q: Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers A: https://www.reddit.com/vertcoin/comments/901e6a/vertnode_an_automated_solution_for_installing/
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Official node scanner list (NOT RELIABLE, current node count could be much much higher. If you are a developer, please help us make a better Node Scanner): https://scanner.vertcoin.org/nodes
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 811 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 811 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Why Vertcoin? Learn about why ASIC Resistance matters! https://www.youtube.com/watch?v=UHXqfZWjuHI
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Hacked (offline) wallet? What the hell?

This is getting awkward.
Last night, 31st of March, 21:32 (GMT +1) 0.5602 BTC were transferred to "1FmMasfuEE6wtpzdWiVnDynfJ5tyyVbhP3". This was almost 100% what was stored in said wallet.
I have full AV, there's 0 spy and/or malware on this computer. What the hell?!
Please help me and look out for that address..
submitted by JayS_NL to Bitcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 500+ Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 500+ Full Nodes running.
Official node scanner list (NOT RELIABLE, current node count could be much much higher. If you are a developer, please help us make a better Node Scanner): https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 867 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 867 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 900 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 900 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

Dogecoin Core 1.7.0 released - Check in here for all info you need

Hi shibes!
The Dogecoin developers are proud to announce the final version of Dogecoin Core 1.7! After lots of coding, testing and swearing this is the next version of our reference client. It brings Dogecoin one big step forward on the technical side of things, with moving to the Bitcoin 0.9 codebase.
The full release notes are available here: https://github.com/dogecoin/dogecoin/releases/tag/v1.7.0
TL;DR of the release notes
Is this mandatory? No, you can stay on 1.6 if you want for now. This update adds quite a few new features you'd miss out on.
How to update?
  1. Backup your wallet! This is very important! Go to File -> Backup Wallet, and save this file in at least two safe places for a good backup.
  2. Exit the client you're running now.
  3. Install the update
    1. For Windows, use the setup.exe to update. If you are using the new 64bit version you'll need to uninstall 1.6 afterwards.
    2. For Mac just overwrite the version you currently have in you Applications folder.
    3. For Linux you'd overwrite your current dogecoin-qt binary with the new one.
  4. Start the client. That's it :)
About going back to 1.6 Once you go to 1.7 there is no easy way back to 1.6. That's why it's important to have a backup of your wallet. Just in case. Be aware that a backup goes out of date after 100 transactions! Several people have been running 1.7 for a while now and see no problem with it, so you probably don't want to go back anyway ;)
Downloads (Listing here this time to make it easier to find)
Changes from RC1
Staying up to date If you want to easily stay up to date with releases, you can subscribe to the mailing list right here: http://sourceforge.net/p/dogecoin/mailman/dogecoin-releases/ That's especially advised if you are a service provider!
General comments For anyone running an exchange, please also note that in light of the 51% attack against Reddcoin last night, the Dogecoin developers now recommend a minimum of 10 confirmations for payments into an exchange.
Thanks Thanks to everyone who contributed so far! Especially leofidus-ger, rnicoll and patricklodder, who have done by far the most of the work for this release. But of course thanks to everyone else who contributed, may it be advice or code or whatever. Also thanks to the Bitcoin developers. And of course thanks to the Dogecoin community! You are what makes it fun to work on all this ;)
submitted by langer_hans to dogecoin [link] [comments]

A Guide to Keeping Keys Offline Using Armory +rPi

Hi Redditors.
I am going to post in this thread my experiences in getting my Desktop (Debian) machine running Armory in watch-only mode, and coupling that with an offline Raspberry Pi (which holds my private keys) for signing the transactions previously made in watch-only mode.
I actually compiled Armory from source directly on my Pi. This guide is probably more for the bitcoin 'power user', as to run Armory online, and broadcast the signed transactions, you need to have a bitcoin full node running (bitcoind).
Basic requirements:
Aimed-for Setup:
I'll post the guide in digestible sections...

Section 1

I should begin by saying I installed source code from git, and got Armory to build the DB on my desktop initially, WITHOUT creating a wallet.. (This allowed me to debug what was going on a little!)
Go to Bitcoin.org, select Armory..
It leads to a Download from Git:
https://github.com/goatpig/BitcoinArmory/releases
Followed the procedure for Linux Debian verify code, compile, install, all straight-forward..
Began by running bitcoind, and telling Armory where to find it. This is the command I used, obviously it was all on one line and didn't include the arrows/explanations!:
python ArmoryQt.py \ --satoshi-datadir=/BlockChain/chain20180414/blocks \ # <-----(where my bitcoind blocks live) --datadir=/ArmoryDataDi \ # <-----(this is instead of ~/.armory) --dbdir=/ArmoryDataDidatabases # <-------(again, non std. place used for Armory's databases.. my choice.) 
So, on the Desktop, after the initial "build databases"
(NB the initial "Build Databases" took about 1.5h and my two CPUs were maxed the whole time, Temps up to 62C. Not ideal; Im not in a rush!)
I then wanted to import a watch-only wallet.
Before I did this, I took a full backup of the Armory data dir:
/ArmoryDataDi
(or ~/.armory in a default installation).
I'd hate to have to make Armory do another full sync with the bitcoind node!

Section 2

Next step: offline wallet (with Private Keys) is on a Raspberry Pi.
I downloaded the source and managed to compile it on the pi itself! :)
Though there were some gymnastics needed to setup the Pi.
My Pi is running Raspbian based on Wheezy.. quite old!
I did the following on the Pi:
apt-get update apt-get upgrade (<---took about an hour!) apt-get install autotools-dev apt-get install autoconf 
Then I followed the instructions exactly as I had done for my Debian Desktop machine, EXCEPT:
I had to increase the Pi's swap space. I upped it from 100Mb to 400Mb.
The compilation took 7 hours, and my poor SD card got a thrashing.
But after compilation, I put the Swap back to 100Mb and Armory runs ok with about 150Mb of memory (no swap needed).
Swap increase on the Pi:
use your favourite editor, and open the file /etc/dphys-swapfile
add/change the following line:
CONF_SWAPSIZE=400 
Then, REBOOT the Pi:
sudo shutdown -h -P now 
Once the compilation was done on the Pi, put the swap back, rebooted and created an Armory wallet.
I added manual entropy and upped the encryption 'time' from 250ms to 2500ms - since the Pi is slow, but I'll be happy to wait for more iterations in the Key Derivation Function.
Once the wallet was created, it obviously prompts you for backup.
I want to add a private key of my own (i.e. import), so don't do the backup until this is over.
I import my Private Key, and Armory checks that this corresponds to a Public Key, which I check is correct.
This is the point now where the Pi storage medium (e.g an SD card) has to be properly destroyed if you ever get rid of it.
I had thought that now would be a good time to decide if your new wallet will generate Segwit receiving addresses, and also addresses used to receive 'change' after a transaction..
But it seems Armory WON'T let you switch to P2SH-P2WPKH unless your Armory is connected to a node offering "WITNESS" service.
Obviously, my Pi is offline and will never connect to a node, so the following will not work on the Pi:
NB: I thought about setting this on the Debian "watch-only" wallet, but that would surely mean doom, as the Pi would not know about those addresses and backups might not keep them.. who knows...
So, end result:- no segwit for me just yet in my offline funds.

--If anyone can offer a solution to this, I'd be very grateful--

Section 3

Ok, now this is a good point to back up your wallet on the Pi. It has your imported keys. I choose a Digital Backup - and put it on a USB key, which will never touch the internet and will be stored off-site. I also chose to encrypt it, because I'm good with passwords..
NB: The Armory paper backup will NOT back up your imported private keys, so keep those somewhere if you're not sweeping them. It would be prudent to have an Armory paper backup anyway, but remember it will likely NOT help you with that imported key.
Now for the watch-only copy of the wallet. I want to get the "watch-only" version onto my Desktop Debian machine.
On the Pi, I created (exported to a USB key) a "watching-only" copy of my wallet.
I would use the RECOMMENDED approach, export the "Entire Wallet File".
As you will see below, I initially exported only the ROOT data, which will NOT capture the watching-only part of the Private Key I entered manually above (i.e. the public Key!).
Now, back on the Debian Desktop machine...
I stopped all my crontab jobs; just give Armory uninterrupted CPU/memory/disk...
I also stopped bitcoind and made a backup prior to any watch-only wallet being imported.
I already made a backup of Armory on my Desktop, before any wallet import.
(this was needed, as I made a mistake.. see below)
So on the Debian Desktop machine, I begin by firing up bitcoind.
my command for this is:
./bitcoind -daemon -datadir=/BlockChain/chain20180414 -dbcache=400 -maxmempool=400 

Section 4

I try running Armory like this:
(I'm actually starting Armory from a script - StartArm.sh)
Inside the script StartArm.sh, it has the line:
python ArmoryQt.py --ram-usage=4 --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
I know from bitter experience that doing a scan over the blockchain for a new wallet takes a looong time and a lot of CPU, and I'd like it to play nicely; not gobble all the memory and swap and run my 2xCPUs both at 100% for four hours...
So... I aim to run with --ram-usage=X and --thread-count=X
(For me in the end, X=1 but I began with X=4)
I began with --ram-usage=4 (<--- = 4x128Mb)
The result is below...
TypeError: cannot concatenate 'str' and 'int' objects 
It didn't recognise the ram-usage and carried on, crippling my Debian desktop PC.
This is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up, and it can take over 30 minutes just to exit nicely from bitcoind and ArmoryDB.
So, I ssh to the machine from another computer, and keep an eye on it with the command
"free -h" 
I'd also be able to do a "sudo reboot now" if needed from here.

Section 5

So, trying to get my --ram-usage command recognised, I tried this line (added quotes):
python ArmoryQt.py --ram-usage="4" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
But no, same error...
Loading Armory Engine: Armory Version: 0.96.4 Armory Build: None PyBtcWallet Version: 1.35 Detected Operating system: Linux OS Variant : ('debian', '9.4', '') User home-directory : /home/ Satoshi BTC directory : /BlockChain/chain20180414 Armory home dir : /ArmoryDataDi ArmoryDB directory : /ArmoryDataDidatabases Armory settings file : /ArmoryDataDiArmorySettings.txt Armory log file : /ArmoryDataDiarmorylog.txt Do wallet checking : True (ERROR) ArmoryUtils.py:3723 - Unsupported language specified. Defaulting to English (en) (ERROR) ArmoryQt.py:1833 - Failed to start Armory database: cannot concatenate 'str' and 'int' objects Traceback (most recent call last): File "ArmoryQt.py", line 1808, in startArmoryDBIfNecessary TheSDM.spawnDB(str(ARMORY_HOME_DIR), TheBDM.armoryDBDir) File "/BitcoinArmory/SDM.py", line 387, in spawnDB pargs.append('--ram-usage=' + ARMORY_RAM_USAGE) TypeError: cannot concatenate 'str' and 'int' objects 

Section 6

So, I edit the Armory python file SDM.py:
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=4') #COMMENTED THIS, SO I CAN HARDCODE =4 # ' + ARMORY_RAM_USAGE) 
Running it, I now have acknowledgement of the --ram-usage=4:
(WARNING) SDM.py:400 - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=4 
Also, even with ram-usage=4, it used too much memory, so I told it to quit.
It took over 30 minutes to stop semi-nicely. The last thing it reported was:
ERROR - 00:25:21: (StringSockets.cpp:351) FcgiSocket::writeAndRead FcgiError: unexpected fcgi header version 
But that didn't seem to matter or corrupt the Armory Database, so I think it's ok.
So, I get brave and change SDM.py as below, and I make sure my script has a command line for --ram-usage="ABCDE" and --thread-count="FGHIJ"; the logic being that these strings "ABCDE" will pass the IF criteria below, and my hardcoded values will be used...
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=1') #COMMENTED THIS, SO I CAN HARDCODE =1 # ' + ARMORY_RAM_USAGE) if ARMORY_THREAD_COUNT != -1 pargs.append('--thread-count=1') #COMMENTED THIS, SO I CAN HARDCODE =1 #' + ARMORY_THREAD_COUNT) 
So, as usual, I use my script and start this with: ./StartArm.sh
(which uses command line:)
python ArmoryQt.py --ram-usage="ABCDE" --thread-count="FGHIJ" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
(this forces it to use my hard-coded values in SDM.py...)
So, this is the command which it reports that it starts with:
(WARNING) SDM.py:400 - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=1 --thread-count=1 
Again, this is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up. So I ssh to the machine and keep an eye on it with:
"free -h" 

Section 7

So, on the Debian Desktop PC, I inserted the USB stick with the watch-only wallet I exported from the Pi.
Start Armory...
Import "Entire Wallet File" watch-only copy.
Wait 4 hours..
YAY!!!
After running Armory for about 30m, the memory usage dropped by 400m... wierd...
It took ~2 hours to get 40% completion.
After 3.5 hours it's almost there...
The memory went up to about 1.7Gb in use and 900Mb of Swap, but the machine remained fairly responsive throughout, apart from a few (10?) periods at the start, where it appeared to freeze for 10-30s at a time.
(That's where my ssh session came in handy - I could check the machine was still ok with a "free -h" command)
Now, I can:
Create an unsigned transaction on my Desktop,
Save the tx to USB stick,
Move to the Pi,
Sign the tx,
Move back to the Desktop,
Broadcast the signed tx.

Section 8

My initial Mistake:
This caused me to have to roll-back my Armory database, using the backup. so you should try to avoid doing this..
On the Pi, I exported only the ROOT data, which will NOT capture the watching-only part of the Private Key
It is RECOMMENDED to use the Digital Export of Entire Wallet File from the Pi when making a watch-only copy. If you just export just the "ROOT data", not the "Entire Wallet File", you'll have problems if you used an imported Private Key in the offline wallet, like I did.
Using the ROOT data text import, after it finished... my balance was zero. So,. I tried a Help->Rescan Balance (Restart Armory, takes 1minute to get back up and running) No Luck. Still zero balance.
So, I try Rescan Databases.. This will take longer. Nah.. no luck.
So, I tried again, thinking it might be to do with the fact that I imported the text "root data" stuff, instead of following the (Recommended) export of watching-wallet file.
So, I used my Armory backup, and wound back the ArmoryDataDi to the point before the install of the (zero balance) wallet. (you should not need to do this, as you will hopefully use the RECOMMENDED approach of exporting the "Entire Wallet File"!)
submitted by fartinator to Bitcoin [link] [comments]

How To Install BitCoin On Ubuntu 16.04 How to install Bitcoin Core Wallet and send Bitcoins Dash: QT Wallet Installation Guide - Linux = G15E01 How to install the QT Wallet - GNU/Linux Version - Ubuntu 16.04 Ubuntu -1 Setting up Bitcoin

Bitcoin Core is a community-driven free software project, released under the MIT license. Verify release signatures Download torrent Source code Show version history Bitcoin Core Release Signing Keys v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+ The Bitcoin Core daemon (bitcoind) is not included in the .dmg file you may have downloaded to install Bitcoin-QT. Bitcoind, along with its support binaries, is instead included in the OS X .tar.gz file listed on the official Bitcoin Core download page. To download this file using Terminal, execute the following command: This one’s for you. I want you to learn Linux, and I want Bitcoin to motivate you to switch. This will be as much a “Linux for Dummies” guide as it is a guide to setting up a Bitcoin node. and then back to bitcoin-qt, sudo apt-get update; sudo apt-get install git; mkdir -p bitcoin-source && cd bitcoin-source git clone https: Do you want to use Bitcoin on Linux? This tutorial explains how to install and use Bitcoin Core on Debian Linux. Bitcoin Core is the official Bitcoin Wallet from bitcoin.org. I will use the latest version from the GIT repository at bitcoin.org. We are ready to install Bitcoin core at this point. To install Bitcoin Core, run the following command. “sudo apt-get install bitcoin-qt” Press ‘y’ and Press <Enter>, the installation should start. It will take a few seconds to install. Once it’s installed, click on “Show Applications” icon and you should see Bitcoin Core icon on

[index] [25596] [7998] [20519] [9865] [77] [17032] [28151] [21442] [5143] [20996]

How To Install BitCoin On Ubuntu 16.04

50+ videos Play all Mix - How to mine Bitcoin Using Linux [2019] YouTube Hacking Wi-Fi in Seconds with Airgeddon & Parrot Security OS [Tutorial] - Duration: 15:34. Null Byte 1,672,354 views Linux QT Wallet installation Featuring VERGE - Duration: 11:26. p75formula 6,181 views. 11:26. Dash Digital Cash ... How to Setup a Bitcoin Wallet with Electrum - Duration: 8:23. This video covers the method to install BitCoins on Ubuntu 16.04 Bitcoin is a virtual and crypto-currency created by Satoshi Nakamoto. For more explanation on this video: https://www.linuxhelp.com ... How to install Bitcoin Core Wallet and send Bitcoins ... Syncing your Bitconnect QT wallet NEW updated 10/27/2018 ... How To Install And Enable Bitcoin Core Wallet On Linux - Duration: 3:08. Ubuntu -1 Setting up Bitcoin Commands, sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt sudo apt-get install bitcoind sudo blkid sudo nano /etc/fstab ...

Flag Counter